Revolvers

 

Ruger New Model single action revolvers need no introduction in regards to their strength and reliability. That’s why we use them as the base for all our single action revolvers. The Ruger ‘Bisley’ grip is the only grip shape when it comes to handling the recoil generated by some of the bigger caliber conversions. As they come out of the box, Ruger single actions are very good revolvers…but they can be made even better!

Please don't hesitate to contact us with any questions or queries.

Building your own Revolvers

There are four improvement up-grade packages that we offer for your Ruger single action;

Basic Grade $110.00

  • Minimize the creep in the trigger pull and reduce pull weight to approx 3lb
  • Fit trigger over-travel stop screw.

Standard Grade $425.00 (includes basic grade)

  • Checkered ejector rod head.
  • Fit a locking over-size base pin.
  • Maximize firing pin protrusion.
  • Re-size the cylinder throats to .0015” to .002” over nominal bore diameter.

Deluxe Grade $1000.00 (includes both basic and standard grades)

  • Minimize cylinder end-float.
  • Tighten cylinder gap to .004” max.
  • Re-cut the forcing cone to either 11° or 18°
  • Taylor throat the barrel.
  • Re-crown the muzzle true to the bore.
  • Smooth the action operation.
  • Grips thinned and fitted to the grip frame, with no square fat edges.
  • Fore-sight narrowed to .100” and face serrated at 75 LPI

Premium Grade $3,400.00 for an all blue gun, on your Ruger Bisley only.

includes:
  • Oversize 5-shot cylinder (where appropriate)
  • Line-bored cylinder
  • Locking oversize base pin
  • Free wheel ratchet
  • .002” cylinder gap
  • Chambers cut to minimum size
  • Headspace set to minimum specs
  • Recessed case heads (where possible)
  • New premium barrel with an 11° forcing cone
  • Action operation smoothed and precisely timed
  • Fit of all parts is held to as tight a minimum that will still allow reliable functioning
  • Trigger to 3lb pull with minimal creep
  • Trigger over-travel stop screw
  • Grips panels slimmed and matched to grip frame
  • Steel ejector rod housing with recoil proof attachment
  • Checkered ejector rod head

*Choose from the list of Options

Get a preliminary costing (all prices are in $AUD) by filling in the form below:

 

 

Options include:
32/20 conversion (new barrel & cylinder, re-blued) $1,600.00
Barrel band fore-sight $225.00
Barrel lapping $110.00
Trigger to 3 to 3-1/2lb with minimal creep $85.00
Trigger over-travel stop screw $35.00
Checkered ejector rod head $45.00
Steel ejector rod housing $75.00
Locking over-size base pin $90.00
Maximize firing pin protrusion $45.00
Re-size cyl throats .0015” to. 002” over nominal bore dia. $135.00
Minimize cylinder end-float. (May require tightening the cylinder gap if gap is excessive after end-float is minimized) $90.00
Tighten cylinder gap to .004” max includes re-cut the forcing cone - 11°or 18°. $175.00
Taylor throat the barrel (if added to work requiring barrel removal) $75.00
Taylor throat only (doesn't include sight re-regulating if it's necessary) $135.00
Re-crown the muzzle true to the bore $80.00
Smooth action operation from $65.00
Grips panels slimmed & matched to grip frame from $65.00
Fore-sight narrowed to .100" (face serrated at 75 LPI) cold blue touch-up. $65.00
TOTAL PRICE = $

 

Personal Details
Name:
Email:
Phone:

 

Additional:
Comments: